Submarine Hose With One End Reinforcement

                Hello, come to consult our products !

                Submarine Hose With One End Reinforcement

                Product Detail

                Product Tags

                Construction & Material
                Main Carcass
                Main Lining / Inner Tube : Smooth, oil and fuel resistant Pure Seamless and Extruded Acrylontrile-Butadiene-Rubber (NBR);
                Safety Lining: special construction to prevent defects or damage cause by incidental tearing or superficial damages of the main linig;
                Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.

                Submarine Hose With One End Reinforcement

                Single Carcass And Double Carcass
                Outer Cover:Smooth black, Synthetic Rubber Resistant to Abrasion, Oil, Sea Water and Sunlight.
                Fittings:End connections built in during manufacture. ASME B 16.5 Class 150lb or 300lb Weld Neck Flat Face or Raised Face on request.
                Tests:All tests according to GEPHOM 2009 and Customer detail.
                Standards and Specifications
                Zebung single carcass hoses are designed and produced in full accordance to OCIMF standards. These products are also subjected to manufacturing and testing requirements dictated by ISO 9000:2001 quality standards.
                Rated working pressure
                The oil hoses have a RWP of at least 15 bar. 19 bar and 21 bar hoses are also available if specified by the customer. They are suitable for operation at an internal pressure from minus 0.85 bar to the RWP.
                Flow Velocity
                The linings of Zebung submarine hoses are constructed from elastomers and fabrics suitable for continuous operation at a flow velocity of 21m/s.

                The submarine hoses are suitable for use with crude oil and liquid petroleum products from -20℃ to 82℃, and an aromatic hydrocarbon content no greater than 70% by volume.
                Electrical Continuity
                A low resistance connection will be provide with a copper wire and helix steel wire.

                1. connecting FPSO
                2. rated working pressure: 21 bar
                3. electrical continuity: electrical continuous or discontinuous
                4. leak detection system: after the failure of the primary carcass, the detector will react to the leakage to remind the operator to remove the damaged hose to avoid economic loss and environmental pollution.
                Specifications can be designed by customer requirements.

                Submarine Hose With One End Reinforcement

                I.D. / mm Weight in air / kg O.D. / mm M.B.R. / m
                9.1m 10.7m 12.2m A B C D
                150(6”) 364/141 402/156 440/171 305 210 240 320 0.6(2.0’)
                200(8”) 473/215 524/238 575/261 355 265 295 375 0.8(2.8’)
                250(10”) 658/282 731/309 804/336 415 320 345 430 1.0(3.3’)
                300(12”) 836/325 928/354 1020/383 485 375 410 500 1.2(4.0’)
                400(16”) 1738/642 1928/701 2118/760 575 475 540 645 1.6(5.3’)
                500(20”) 2312/904 2554/984 2796/1064 695 580 650 780 2.0(6.6’)
                600(24”) 3244/1338 3600/1467 3956/1596 810 700 775 905 2.4(8.0’)

                Single Carcass Floating(300mm) Prototype BV certificate

                Floating tubing BV certificate

                Single Carcass Submarine(300mm) Prototype BV certificate

                Underwater tubing BV certificate

                Single Carcass Floating(600mm) Prototype BV certificate


                Single Carcass Submarine(600mm) Prototype BV certificate


                Floating Double Carcass Prototype BV certificate

                SOC of 24'' 雙胎體漂浮油管BV證書(水?。? itemprop=

                Submarine Double Carcass Prototype BV certificate

                SOC of 24'' 雙胎體水下油管BV證書(水?。? itemprop=

                Own film production base

                The quality of film directly determines the quality of hose. Therefore, zebung has invested a lot of money to build a film production base. All hose products of zebung adopt self-produced film.


                Multiple production lines to ensure production progress

                Our factory has many modern production lines and a large number of experienced technical engineers. It not only has high quality production quality, but also can ensure the customer's requirements for the supply time of products.


                Each pipeline product is subject to strict inspection before leaving the factory

                We have established a high-tech product and raw material testing laboratory. We have been committed to the digitization of product quality. Each product needs to go through a strict inspection process before it can leave the factory after all product data meet the requirements.


                Covering the global logistics network and strict finished product packaging and delivery process

                Relying on the distance advantages of Tianjin port and Qingdao port, Beijing Capital International Airport and Daxing International Airport, we have established a fast logistics network covering the world, basically covering 98% of countries and regions around the world. After the products are qualified in the off-line inspection, they will be delivered at the first time. At the same time, when our products are delivered, we have a strict packing process to ensure that the products will not cause losses due to logistics during transportation.

              1. Previous:
              2. Next:

              3. Leave your details and we'll contact you at the first time.

                Write your message here and send it to us
                WhatsApp Online Chat !
                日韩大片高清播放器_无码视频一区二区三区_亚洲欧美日韩成人综合网_1000部拍拍拍18勿入免费视_日韩人妻无码一区二区三区99 无码国产偷倩在线播放老年人 国产在线乱码一区二区三区 亚洲综合精品成人 婷婷五月花丁香综合 精品国产三级A∨在线无码 亚洲AV无码男人的天堂 久久久亚洲综合久久久久87 久久久久久国产精品美女 原来神马电影网免费 在线精品国产一区二区三区