Mainline Submarine Hose With Collars

                Hello, come to consult our products !

                Mainline Submarine Hose With Collars

                Product Detail

                Product Tags

                Construction & Material

                Main Carcass
                Main Lining / Inner Tube: Smooth, oil and fuel resistant Pure Seamless and Extruded Acrylontrile-Butadiene-Rubber (NBR);
                Safety Lining: special construction to prevent defects or damage cause by incidental tearing or superficial damages of the main linig;
                Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.
                Single Carcass And Double Carcass

                Mainline Submarine Hose With CollarsOuter Cover:Smooth black, Synthetic Rubber Resistant to Abrasion, Oil, Sea Water and Sunlight.
                Fittings:End connections built in during manufacture. ASME B 16.5 Class 150lb or 300lb Weld Neck Flat Face or Raised Face on request.
                Tests:All tests according to GEPHOM 2009 and Customer detail.
                Standards and Specifications
                Zebung single carcass hoses are designed and produced in full accordance to OCIMF standards. These products are also subjected to manufacturing and testing requirements dictated by ISO 9000:2001 quality standards.
                Rated working pressure
                The oil hoses have a RWP of at least 15 bar. 19 bar and 21 bar hoses are also available if specified by the customer. They are suitable for operation at an internal pressure from minus 0.85 bar to the RWP.
                Flow Velocity
                The linings of Zebung submarine hoses are constructed from elastomers and fabrics suitable for continuous operation at a flow velocity of 21m/s.

                The submarine hoses are suitable for use with crude oil and liquid petroleum products from -20℃ to 82℃, and an aromatic hydrocarbon content no greater than 70% by volume.

                Electrical Continuity
                A low resistance connection will be provide with a copper wire and helix steel wire.

                1. connecting sea chest and buoy on buoy system
                2. rated working pressure: 21 bar
                3. electrical continuity: electrical continuous or discontinuous
                4. leak detection system: after the failure of the primary carcass, the detector will react to the leakage to remind the operator to remove the damaged hose to avoid economic loss and environmental pollution.
                Specifications can be designed by customer requirements.

                Mainline Submarine Hose With Collars

                I.D. / mm Weight in air / KG O.D. / mm M.B.R. / m
                9.1m 10.7m 12.2m A B
                150(6”) 372/144 415/161 458/178 368 254 0.6(2.0’)
                200(8”) 505/217 561/242 617/267 471 311 0.8(2.8’)
                250(10”) 681/282 762/311 843/340 471 368 1.0(3.3’)
                300(12”) 942/346 1052/381 1162/416 581 471 1.2(4.0’)
                400(16”) 1389/592 1559/659 1729/726 697 581 1.6(5.3’)
                500(20”) 1840/837 2072/928 2304/1019 799 697 2.0(6.6’)
                600(24”) 2704/1254 3030/1399 3356/1544 946 799 2.4(8.0’)


                Single Carcass Floating Prototype BV certificate

                Floating tubing BV certificate

                Single Carcass Submarine Prototype BV certificate

                Underwater tubing BV certificate

                Single Carcass Floating(600mm) Prototype BV certificate


                Single Carcass Submarine(600mm) Prototype BV certificate


                Floating Double Carcass Prototype BV certificate

                SOC of 24'' 雙胎體漂浮油管BV證書(水?。? itemprop=

                Submarine Double Carcass Prototype BV certificate

                SOC of 24'' 雙胎體水下油管BV證書(水?。? itemprop=

                Own film production base

                The quality of film directly determines the quality of hose. Therefore, zebung has invested a lot of money to build a film production base. All hose products of zebung adopt self-produced film.


                Multiple production lines to ensure production progress

                Our factory has many modern production lines and a large number of experienced technical engineers. It not only has high quality production quality, but also can ensure the customer's requirements for the supply time of products.


                Each pipeline product is subject to strict inspection before leaving the factory

                We have established a high-tech product and raw material testing laboratory. We have been committed to the digitization of product quality. Each product needs to go through a strict inspection process before it can leave the factory after all product data meet the requirements.


                Covering the global logistics network and strict finished product packaging and delivery process

                Relying on the distance advantages of Tianjin port and Qingdao port, Beijing Capital International Airport and Daxing International Airport, we have established a fast logistics network covering the world, basically covering 98% of countries and regions around the world. After the products are qualified in the off-line inspection, they will be delivered at the first time. At the same time, when our products are delivered, we have a strict packing process to ensure that the products will not cause losses due to logistics during transportation.

              1. Previous:
              2. Next:

              3. Leave your details and we'll contact you at the first time.

                Write your message here and send it to us
                WhatsApp Online Chat !
                日韩大片高清播放器_无码视频一区二区三区_亚洲欧美日韩成人综合网_1000部拍拍拍18勿入免费视_日韩人妻无码一区二区三区99 亚洲午夜成人精品无码色欲 欧美日韩中文国产一区 BRAZZERSHD欧美巨大 女女互揉吃奶揉到高潮AV 极品少妇被猛的白浆直喷白浆 人妻无码久久精品 亚洲香蕉一本大道在线 男女爽爽午夜18禁影院免费 国产欧美精品一区二区三区-老狼 秋霞在线观看视频